Tile roofing
Architectural shingles
Metal roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Repair Across Bloomington
Roof repair in Bloomington usually means dealing with heat-degraded flat or low-slope surfaces, not just missing shingles. Most homes here were built between the 1950s and 1970s with built-up or modified bitumen roofs, and after enough 100°F summers, that membrane cracks, blisters, and starts letting water through. Tilecraft Roofing works on these systems every week. We know what a Bloomington roof looks like after ten or fifteen years of inland sun, and we quote the repair honestly. Call (833) 467-4846 for a free estimate, and we’ll come out, look at the roof, and tell you what’s actually needed.
Why Tilecraft Roofing Is Bloomington’s Preferred Roof Repair Company
Bloomington homeowners call us because we carry materials from seven major manufacturers: GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. That breadth matters here. A flat-roof patch on a 1960s tract home off Slover Avenue needs a different product than a shingle repair on a pitched addition behind a detached garage. We’re not tied to one brand, so the recommendation follows the roof, not our inventory.
Ruben Castellano runs the crew. He’s built the company around one principle: look before you quote. We treat inspection as a standalone service, not a sales funnel. If a repair will hold, we say so. If replacement is the only sound option, we explain why in plain terms. That approach has earned us consistent repeat calls from Bloomington, Rialto, and Fontana homeowners who want an honest read on their roof.
Response time to Bloomington from our Santa Ana base is usually same-week for non-emergency work, and we keep our schedules flexible for leak calls ahead of rain. We know the 92316 ZIP, the older blocks near Valley Boulevard, and the newer infill lots east of Cedar Avenue. That local familiarity shortens the diagnosis time, which keeps your bill lower.
Styles & brands we work with
Shingle Roof Repair in Bloomington
Shingle Roof Repair in Bloomington covers the pitched sections of your roof: the main house on those rare gable or hip designs, additions, and detached garages. The work involves replacing cracked or missing shingles, re-sealing nail heads, repairing ridge caps, and checking the underlayment where shingles meet walls or valleys. We typically see shingle failures here after wind events lift edges, or after years of UV exposure make the granules loosen and the mat brittle.
Shingle repair pricing in Bloomington runs from $350 for a small spot repair up to $1,800 for a larger section with underlayment replacement and re-flashing. The average call lands between $450 and $900. What drives the cost is access, slope, and how far the decking has deteriorated under the failed shingles.
Replacement in Sections, Not Always Whole Roofs
When shingles fail on a Bloomington home, the rest of the roof often has years of life left. We’ll replace only the damaged section and match the existing color as closely as the original manufacturer allows. If you have a discontinued shingle, we’ll show you a GAF Timberline or Owens Corning Duration alternative that won’t look patchy from the street.
Flashing and Valley Work
Many shingle leaks on Bloomington homes trace back to flashing, not the shingles themselves. Pipe boots crack, step flashing pulls away, and valley metal corrodes after decades of exposure. We repair those points with new metal and sealant, and only replace shingles where they’re actually compromised.
Storm Damage Roof Repair in Bloomington
Storm Damage Roof Repair in Bloomington means two things: fixing what wind lifted during the Santa Ana events, and sealing what rain exposed on older flat roofs. Wind here doesn’t usually tear whole roofs off, but it does peel drip edge, rip vent boots, and send tree limbs onto low-slope sections. What we see most after a storm is water staining on ceilings directly below ponded areas on flat sections that drain too slowly.
Storm repair pricing depends on the extent, not the drama. A lifted shingle section typically runs $400 to $1,200. A punctured flat roof membrane with wet insulation in one area can run $900 to $2,500. If a limb has gone through the decking, you’re looking at structural repair, which starts around $1,500 and goes up with the size of the opening. We’ll put the numbers in writing before any work starts.
Wind-Lift and Edge Repair
Edge damage is the most common storm call we get in the 92316 area. Wind gets under the drip edge on flat roofs and peels it back, letting rain slip under the membrane at the perimeter. We re-secure the edge, replace damaged sections of drip edge and flashing, and check that the membrane is still bonded at eave lines.
Drainage and Standing Water
Flat roofs in Bloomington are only as good as their drainage. When the occasional winter storm drops an inch of rain on a roof with clogged scuppers or a sagged deck, water ponds and finds every pinhole. Part of our storm repair work includes clearing debris from drains and adding tapered crickets where water isn’t moving off the roof fast enough.
Trusted Brands We Service in Bloomington
We stock common repair materials for the brands Bloomington homes already have, and we’re authorized to install products from all seven of our manufacturer partners. That matters when you’re patching a Tamko modified bitumen roof and need a compatible cap sheet, or when an Atlas shingle section needs matching color from current production. Boral is in our lineup too, which means we handle clay and concrete tile repairs that most local shingle crews won’t touch. You get the right material for your roof, not whatever happens to be on the truck.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Repair Problems We See in Bloomington Homes
- Swamp cooler penetrations that leak after the unit fails. Roof-mounted coolers are everywhere on older Bloomington homes, and the curb flashing around them was often sealed with mastic that hardens and cracks in the heat. Once the seal fails, water follows the penetration straight into the ceiling below.
- Blistered and cracked modified bitumen on flat roofs. Decades of 100°F plus summers bake the granule cap sheet until it splits. These splits widen with each heat cycle and open up during winter rain, letting water pool on the decking.
- Missing or lifted drip edge on low-slope perimeters. Bloomington wind events and heat expansion both work on drip edge. When it lifts, water backs up under the membrane at the eave and rots the fascia board from the inside.
- Ponding water on sagged flat sections over additions and garages. Older additions often had undersized framing, and after fifty years the deck sags. Water sits in those low spots, degrades the membrane faster, and eventually finds a seam or fastener to leak through.
Pricing for Roof Repair in Bloomington, CA
Here’s what Bloomington homeowners can expect to pay for common repairs. Leak diagnosis is free with repair work. Shingle spot repairs: $350 to $800. Flat roof membrane patches over a swamp cooler curb: $650 to $1,400. Flashing replacement around vents or walls: $400 to $1,100. Valley re-flashing on a shingle roof: $600 to $1,600. Drainage improvement with tapered crickets: $1,200 to $2,800. Larger storm repairs with wet insulation removal run $1,500 to $3,500 or more depending on square footage. Every quote is line-itemed, and we don’t change the number once work begins unless you approve a change order first. Call (833) 467-4846 to schedule your free estimate.
We Also Serve Cities Near Bloomington
Our Roof Repair crews cover Bloomington and the surrounding Inland Empire communities: Fontana, Rialto, Glen Avon, and Pedley. If you’re in one of those cities, the same inspection-first process applies. For Bloomington homeowners specifically, see our Roof Repair in Bloomington page for details on schedules and coverage.
Serving Bloomington, CA — Our Local Coverage Area
We’re based in the Bloomington area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Repair in Bloomington
Bloomington sits in a higher-wind zone than coastal Orange County, and the building code here requires roofing materials and fastening patterns rated for inland wind exposure. Most of our flat-roof repairs use a mechanically fastened base sheet with a heat-welded or adhered cap sheet, plus edge metal that meets the current wind uplift standard for the 92316 area. A compliant repair includes upgraded fasteners at the perimeter and corner zones, where wind load is highest. A cheap bid often skips those fasteners. Call (833) 467-4846 if you want a quote that states the wind rating in writing.
Yes. When a Bloomington homeowner files a storm damage claim, the adjuster looks at whether the roof was built and repaired to current code. If your repair paperwork shows wind-rated fastening, proper flashing details, and a permit record, the claim has a much stronger basis. If the damage traces to an undocumented patch job with mastic over a cracked curb, the insurer is more likely to classify it as wear and tear. We can document every layer we install and provide the paperwork you’d give your adjuster. Call (833) 467-4846 for a free estimate, and we’ll talk through what documentation you’d receive.
Because they take full sun exposure all day with no shade break, and the surface temperature on a modified bitumen roof in summer easily exceeds 150°F. That heat cycles the membrane every day for months, and any water that ponds after a rain accelerates the breakdown by boiling off inside the system. Pitched shingle roofs shed water and run cooler due to airflow underneath. Flat roofs here also collect debris that holds moisture against the surface. That’s why we’re more aggressive about checking drainage on Bloomington flat roofs than we’d be on a shingle roof in Bloomington’s newer tracts.
Look at three things: the materials named line by line, the fastener and flashing details, and whether the quote includes a permit. One bid may be lower because it skips drip edge replacement or reuses old flashing around a swamp cooler curb. Another may be higher because it specifies a heat-welded cap sheet instead of a cold-applied patch. Put them side by side line by line, and ask each contractor to explain what they’re leaving out. We encourage that comparison. Our quotes are detailed enough to hold up to it, and our free estimate call is (833) 467-4846.
Usually, yes. We rebuild the curb flashing with new metal and ice and water shield around the opening, replace the failed mastic with a proper two-part sealant, and patch the surrounding membrane if it’s heat-cracked within a few feet of the penetration. On a 1950s single-story tract home off Valley Boulevard, we tore off blistered modified bitumen down to the decking and found the curb flashing sealed with cracked mastic. We rebuilt the penetration and capped the section, and the roof held through the next winter rain. A full replacement is only needed if the decking around the curb has rotted or the membrane is failing across the whole roof plane. Call (833) 467-4846 to have us look at yours.
Written by Ruben Castellano, Owner at Tilecraft Roofing, serving Bloomington and the Inland Empire with inspection-first roof repair and replacement.