Tile roofing
Architectural shingles
Metal roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Repair Across Compton
Roof repair in Compton usually costs between $350 and $1,400 for the jobs we handle most often: shingle replacement, leak repair, flashing work, and flat roof patches. Most Compton homeowners call us when a leak shows up after rain or when Santa Ana winds peel back a section of old shingles. We work across 90220, 90221, 90222, and 90223, and we know the housing stock here well enough to tell you what’s worth patching and what’s worth a closer look. Call (833) 467-4846 to schedule someone to come out.
Our Roof Repair crew sees a steady stream of mid-century bungalows and dingbat-style apartments that have been patched two or three times over the decades. That matters because Compton’s roofs fail in predictable, local ways – and knowing those patterns means we find the real problem on the first visit, not the third.
Why Tilecraft Roofing Is Compton’s Preferred Roof Repair Company
Ruben Castellano runs our repair operation with a simple rule: we look before we quote. That inspection-first approach is why homeowners off Rosecrans Avenue and throughout Compton call us for second opinions when another contractor already quoted a full replacement. We pull back a few shingles, check the decking and fasteners, and often find the roof has years left in it with targeted repairs instead of a tear-off.
We have repaired roofs on 1920s clapboard bungalows near Willowbrook, 1950s stucco tract homes around the Hub City area, and 1960s low-rise apartment buildings with flat roofs that pond after heavy winter rain. The common thread is that most Compton roofs are low-slope or shallow-gable, which changes how water moves and where failures happen. A crew that mostly does steep-pitch tile work in other cities misses what’s happening at a 2:12 transition here.
We are authorized to install products from seven major manufacturers – GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. That means Compton homeowners choose the material that fits their roof and their budget, not whatever we happen to stock. And whether you need Atlas shingles matched to an existing patch or Boral tile for a premium detail, we can source it without sitting on the phone with a distributor for a week.
Styles & brands we work with






Metal Roof Repair in Compton
Metal Roof Repair in Compton usually means addressing rust and corrosion at seams, fasteners, and flashings – and in this city, that corrosion moves faster than it does ten miles inland. The marine layer that rolls in off the coast most mornings keeps surfaces damp longer, and salt in that air attacks standard electro-galvanized hardware within a few years. We regularly replace fastener rows on standing-seam and corrugated metal roofs where the screw heads are bleeding rust down the panel face.
Most metal roof repair here runs $450 – $1,800 depending on how many panels need re-fastening, whether seams need re-sealing, and whether the underlayment has started to break down. A simple seam re-seal on a small garage roof might come in near the low end. A rusted-out valley with structural touch-up runs toward the higher end.
Fastener and Seam Service on Corroded Panels
We remove rusted fasteners, treat the substrate, and re-secure panels with stainless or hot-dip galvanized hardware that holds up in Compton’s coastal air. On metal roofs that have been up since the 1970s or 1980s, we also check for hidden rust at the clip lines and under ridge caps, because that is usually where the next leak starts.
Flat-Seam and Low-Slope Metal Roof Patch Work
Some Compton commercial buildings and a few older homes have flat-seam metal or low-slope metal roofing. Those seams fail through repeated standing moisture, and the fix is resealing with a reinforced membrane and re-tooling the seam, not smearing mastic over the top. We see DIY mastic repairs all the time that trap water underneath and make the eventual professional repair more expensive.
Commercial Roof Repair in Compton
Commercial Roof Repair in Compton concentrates on low-slope membrane roofs, which means we are often working on dingbat-style apartment buildings along Alondra Boulevard, warehouses near the 91, and retail strips along Long Beach Boulevard. The age of these buildings means we are usually dealing with built-up roofs or early single-ply membranes that have reached the end of their service life in patches rather than all at once.
Commercial roof repair pricing in Compton runs broader than residential: $800 – $5,000 for most scopes, depending on square footage, the membrane type, and whether we are doing spot repairs or a full seam-over. We provide written line-item quotes for every commercial job, so the building owner sees exactly where the money goes before we start.
Membrane Repairs and Ponding Water Abatement
Flat and low-slope commercial roofs in Compton collect water after winter storms, and when that water sits, it finds its way into seam voids and old penetration boots. We repair the underlying slope or add tapered crickets where practical, then re-seal seams with materials matched to the existing membrane – which matters because mixing incompatible membranes causes premature failure.
Parapet and Flashing Restoration on Older Buildings
Many Compton commercial buildings have parapet walls with coping metal that has pulled away over decades of heat and wind. When the parapet leaks, the water travels inside the wall and shows up as stains far from the actual entry point. We pull back the failed material, reset flashing at the parapet-to-roof transition, and seal penetrations with stainless or hot-dip hardware that resists the same corrosion cycle.
Trusted Brands We Service in Compton
We stock and install materials from Atlas, Tamko, GAF, and Boral for Compton repair work – along with CertainTeed, Owens Corning, and IKO for homeowners who have an existing shingle line they want to match. The advantage of working with seven brands is that we do not have to force-fit a GAF shingle onto a roof that was originally done in Tamko, or push Boral tile when a simple Atlas match is the honest answer. For most Compton bungalows, the right call is a mid-grade architectural shingle that holds up to UV and wind lift without costing more than the roof underneath it can support. Call (833) 467-4846 and we will tell you what you actually need.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Repair Problems We See in Compton Homes
- Rust jacking at fastener heads and drip edge on fascia: Compton’s marine-layer humidity keeps old electro-galvanized hardware damp, and within a few years the rust swells and lifts shingles from the deck. We see this on nearly every pre-1980 roof we open up.
- Seam failure and ponding at flat-to-pitch transitions: The 2:12 or flatter roofs on 1920s-1950s bungalows collect water at the break where the roof flattens out, and Santa Ana winds peel aged membrane edges until water pushes through. The fix is a reinforced membrane at the transition, not more tar.
- Corroded valleys and decayed underlayment under twice-patched shingles: Original skip sheathing on old Compton homes traps moisture below layers of architectural shingles, and by the time a leak shows, the valley metal is often rusted through. We replace the metal and the damaged board in one pass.
- Failed chimney and vent boot seals: The temperature swings between morning marine layer and afternoon sun stress old rubber boots until they crack, especially on the shallow-pitch roofs common in Compton. This is one of the cheapest repairs to do early and one of the most expensive to ignore.
Pricing for Roof Repair in Compton, CA
Here is what we see in Compton, and what you should expect a honest quote to land near. Shingle replacement runs $350 – $850 for a typical patch of 10 to 20 shingles. Leak repair averages $400 – $1,200 when we can locate the entry point in one visit. Flashing repair runs $450 – $950 for a single penetration or chimney. Flat roof patches run $500 – $1,500 depending on the membrane type and affected area. The cost differences come down to roof access, materials match, and whether the decking underneath has rot that needs to be cut out and replaced. We inspect before we quote, and the estimate is always free.
One thing to watch: the coastal-spec version of a repair costs more up front because stainless and hot-dip hardware runs about 20 – 40% more than standard electro-galvanized. But that standard hardware fails within five years in Compton, and then you pay for the repair again plus the damage the rust caused. We quote coastal-spec by default here because it is the only honest option.
We Also Serve Cities Near Compton
Our repair crews work from Compton outward, and we regularly take calls from homeowners in East Rancho Dominguez, West Rancho Dominguez, Carson, and Gardena. If you live in any of these nearby cities, the same inspection-first approach applies, and we bring the same material options from our seven manufacturer partnerships. Call (833) 467-4846 to schedule a repair estimate wherever you are.
Serving Compton, CA — Our Local Coverage Area
We’re based in the Compton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Repair in Compton
Compton sits close enough to the coast that the marine layer rolls through most mornings, coating roofs in a fine salt-laden damp that never fully dries in the shade. Standard electro-galvanized nail coatings break down in that environment within a few years, while the same hardware lasts a decade or more in drier inland areas. The fix is to use hot-dip galvanized or stainless hardware on any roof repair in Compton, which is what we specify by default on every job we do here.
The typical repair on a ponding low-slope roof is to address the low spot first, either with tapered insulation or a reinforced membrane at the affected area, then re-seal the surrounding seams so standing water has no entry point. On older Compton bungalows with 2:12 or flatter roofs, the ponding often reveals a sagging deck board or a failed flat-to-pitch transition, and the repair includes replacing that wood before re-roofing over it. A ponding repair on a small bungalow roof section runs $500 – $1,500 in Compton, and the estimate is free, so call (833) 467-4846 to get eyes on it before it gets worse.
Yes, and the difference matters. We specify stainless or hot-dip galvanized fasteners, marine-grade sealants at all exposed seams, and heavier-gauge flashing at roof-to-wall transitions on every metal roof repair in Compton. Standard box-store hardware and sealant might hold for a couple of years, but the coastal air here will corrode it well before the rest of the roof needs attention, and you will pay for the same repair twice.
The coastal-spec quote runs 20 – 40% higher on material costs because it calls for stainless or hot-dip galvanized hardware, heavier flashing, and sealants rated for continuous salt exposure. The inland-spec quote uses standard electro-galvanized fasteners and basic flashing, which saves you money today and costs you a full re-repair within five years when the rust comes back. We quote coastal-spec in Compton by default because the marine layer here makes it the only option that actually lasts.
Compare the hardware and material line items, not just the bottom number. Ask each contractor whether they are using electro-galvanized or hot-dip/stainless fasteners, whether they inspect the decking before quoting, and whether they will give you a written line-item scope rather than a lump sum. If a bid for a Compton roof repair does not mention corrosion or the marine layer at all, that contractor probably has not thought about what your roof actually goes through, and you should call (833) 467-4846 instead for an estimate from a crew that works this city every week.
Written by Ruben Castellano, Owner at Tilecraft Roofing, serving Compton and the surrounding South Bay cities.