Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roof Installation Cost in Santa Ana?
Metal roof installation in Santa Ana typically runs $19,000 to $46,000 for a full residential roof, or roughly $9 to $22 per square foot installed depending on the metal, panel type, and how much structural work your roof needs. A straightforward standing-seam job on a 1,600-square-foot ranch home usually lands near $24,000. A complex tile-to-metal conversion on a two-story near Floral Park can push past $50,000. Those are installed prices, materials and labor together, not the panel cost alone.
We look before we quote. Every number on this page comes from what we see walking Santa Ana roofs, then measuring them. If you want the exact figure for your house, a free estimate gets you there faster than any guide: call (833) 467-4846.
Key Takeaways
- Most Santa Ana homeowners pay $19,000-$46,000 for a complete metal roof, installed.
- Standing-seam steel is the most requested system here; stone-coated steel is the value pick for a tile look.
- The panel type and gauge swing the price more than the color or finish ever will.
- Santa Ana’s hot, dry summers and occasional Santa Ana wind events shape which fastening and underlayment systems we recommend.
- Pricing is set by roof size, pitch, complexity, and the condition of the deck underneath. Nothing else.
Metal Roof Installation Cost Breakdown (2026)
Here’s how a Santa Ana metal roof breaks down line by line. Every range below reflects the local market this year, and every range is installed cost, meaning material plus labor. If you’re comparing against an asphalt quote, know that the systems underneath are not the same.
| Line Item | Typical Range (Santa Ana, 2026) |
|---|---|
| Standing-seam steel, installed | $14-$24 per sq ft |
| Stone-coated steel (tile-profile), installed | $10-$18 per sq ft |
| Corrugated or exposed-fastener steel, installed | $8-$14 per sq ft |
| Aluminum standing-seam (coastal-grade) | $16-$28 per sq ft |
| Tear-off and disposal of existing roofing | $1.50-$4 per sq ft |
| Deck repair, per sheet of sheathing | $90-$220 each |
| Underlayment (synthetic or peel-and-stick) | $1-$3 per sq ft |
| Flashing, ridge, valleys, and penetrations | $800-$3,000 total |
| New fasteners and clips | $400-$1,200 |
| Permit (City of Santa Ana) | $350-$900 |
On a typical 1,800-square-foot Santa Ana roof, that math lands somewhere around $21,000 for stone-coated steel and $30,000-$38,000 for standing seam. The single biggest swing factor is the panel: a 24-gauge standing-seam panel costs meaningfully more than a 26-gauge, and the difference is longevity, not looks. The second biggest is the deck. We can’t know what’s under your existing roof until it’s off, and neither can anyone else quoting from the driveway.
What drives price up: steep pitch, multiple roof planes, skylights and chimneys, a second story, and having to add structural support. What drives it down: a simple gable roof, easy access, a deck in good shape, and choosing stone-coated steel over standing seam. When the existing roof is a heavy clay or concrete tile, the tear-off adds cost, but the result is a roof that sheds weight and lasts decades longer than what’s coming off. For the tile-specific side of that conversation, our Metal Roof Installation in South Gate page walks through how a tile-to-metal conversion actually goes.
What Affects Metal Roof Installation Pricing in Santa Ana
Six factors move the number more than anything else. Here’s what we watch for on Santa Ana roofs specifically.
- Roof size and shape. A 1,200-square-foot bungalow off Washington Street has a very different price than a 3,200-square-foot two-story. More square footage means more panel, more underlayment, and more labor. Complex rooflines with many hips, valleys, and dormers add cuts and waste.
- Panel type and gauge. Standing-seam steel is the premium choice and priced like it. Stone-coated steel delivers a tile-profile look that fits a lot of Santa Ana neighborhoods, at a lower per-square-foot cost. Exposed-fastener corrugated is the budget option and works fine on sheds and simple roofs, but we flag its shorter fastener life openly.
- Local climate and sun exposure. Santa Ana gets hot, dry summers and the occasional Santa Ana wind event, with strong afternoon sun most of the year. That combination drives us toward specific underlayment systems and fastener choices. A cooler, darker finish can help with attic heat, and wind-rated fastening matters here more than most homeowners realize.
- Deck condition. Under 40-plus-year-old roofs, we routinely find soft sheathing and dry-rotted fascia. Replacing a few sheets is normal. Skipping that step on a metal roof is a mistake, because metal hides nothing and lasts decades longer than the deck under it if the deck wasn’t sound to start.
- Old roofing removal. Tearing off concrete tile or multiple layers of asphalt adds labor and disposal cost. It also lets us inspect the deck, which we won’t skip. If the old deck is sound and the pitch allows it, we can sometimes install over it, but that’s a call we make per roof.
- Permits and City of Santa Ana requirements. Metal roofs need a permit, and the city has its own submittal process. We handle the paperwork, but the permit fee shows up in your number. Skipping the permit is not something we’ll do, and no honest contractor should offer it.
One more thing that affects how we quote: whether your roof has any existing structural issues the metal can’t fix. We start with an inspection, not a sales pitch, because a roof that needs deck repair needs it regardless of what goes on top. For the full picture of what an inspection covers, see our home page and the services we run.
How to Save on Metal Roof Installation
There’s real money to be had in a few practical decisions. None of them involve cheaping out on the parts that matter.
- Choose stone-coated steel over standing seam if the look allows. On the same 1,800-square-foot roof, that can save $8,000-$14,000 while still getting a metal roof with a long service life and a tile appearance that fits Santa Ana’s older neighborhoods.
- Fix small deck issues early. A few soft sheets caught during inspection cost a fraction of what it costs to tear back into a finished roof. This is why we inspect before we quote.
- Bundle the tear-off, deck repair, and install in one scope. Scheduling everything in one pass cuts labor and waste. Splitting the work across multiple visits rarely saves money, it just sequences it.
- Get the permit pulled correctly the first time. Re-submittals add fees and time. We handle City of Santa Ana permits as part of the job.
- Ask about manufacturer-backed material warranties. Through our partnerships, certain products come with stronger material coverage. It’s a quiet saving, but a real one.
None of that replaces a real quote, though. The only way to know what your roof actually costs is to have someone who installs metal walk it. We offer free estimates and don’t pressure anyone into a replacement they don’t need. Call (833) 467-4846 when you’re ready. Repair when repair is right, replace when it’s not.
FAQs – Metal Roof Installation Cost
How much does metal roof installation cost in Santa Ana in 2026?
Most Santa Ana homeowners pay between $19,000 and $46,000 for a complete metal roof, installed, which works out to roughly $9 to $22 per square foot. A simple, smaller home on the low end of that math lands around $19,000, while a two-story with a complex roofline and standing-seam steel will run toward the top. Call (833) 467-4846 for an exact quote on your roof; estimates are free.
Is metal roofing cheaper or more expensive than asphalt in Santa Ana?
Metal is more expensive up front, typically 2 to 3 times the installed cost of a standard asphalt shingle roof. Asphalt on a comparable Santa Ana home might come in around $9,000-$15,000, while metal starts near $19,000. The gap narrows over time, though, because a metal roof lasts far longer and reflects heat better in our climate. Whether the math works for you depends on how long you plan to stay. Call (833) 467-4846 and we’ll walk through both numbers for your house.
What’s the cheapest metal roof option for my Santa Ana home?
Exposed-fastener corrugated steel is the cheapest at roughly $8 to $14 per square foot installed, and stone-coated steel is the next step up at about $10 to $18 per square foot. Corrugated is fine on simple roofs and outbuildings, but its exposed fasteners wear sooner than a hidden-clip system, so on a main house we usually steer people to stone-coated steel instead. We install products from GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral, so the material matches the roof, not our inventory. Call (833) 467-4846 for an honest recommendation.
Does a metal roof add resale value in Santa Ana?
A metal roof can support resale in Santa Ana, and the size of the effect depends on the buyer and the material chosen. In a hot-market city where buyers know roofing costs, a documented new metal roof with a manufacturer-backed material warranty is a selling point, not a footnote. On the cost side, expect $19,000-$46,000 installed, and treat the resale value as a long-term benefit rather than a quick recovery. Call (833) 467-4846 to talk through the cost of your specific roof.
How long does a metal roof last compared to other materials?
A properly installed metal roof typically lasts 40 to 70 years, depending on the metal and panel system, compared with 20-25 years for asphalt shingles and 30-50 for concrete tile in good condition. Given that lifespan, the higher install price spreads out over more years than most roofing decisions allow. Santa Ana’s sun and occasional wind push us toward specific fastening and finish choices that hold up here. Call (833) 467-4846 for an estimate and we’ll explain which system fits your roof and budget.
Talk to a Roofer Who’ll Quote Your Actual Roof
Metal roofing is a real investment, and the price only means something when it’s tied to your specific roof, not a national average. We’re a full-service roofer covering inspection, repair, and complete replacement, and we install products from seven leading brands including GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. That range lets you pick the right material for your roof and your budget, including premium tile-profile systems most local roofers don’t touch. We look before we quote, and we won’t push a replacement you don’t need.
Call (833) 467-4846 for a free estimate. We’ll inspect the roof, measure it, and give you a straight number for metal, whether that’s stone-coated steel, standing seam, or another system that fits Santa Ana’s climate and your house. If a repair gets you years more out of what you have, we’ll say so.
Pricing reflects the Santa Ana market as of 2026. Tilecraft Roofing offers free estimates – call (833) 467-4846.
What Our Customers Say
"Quality work on the repair. There were a few nails left in the driveway that the magnet missed, so check yours before driving over it. Otherwise no complaints."
— Oscar Morales"Leak over the kitchen turned out to be a cracked boot around a vent pipe, not the roof itself. He showed me the photo from up there and replaced the boot for a couple hundred dollars. The company before him had quoted a full tear off."
— Rosa Garcia"Flashing where the roof meets the chimney had never been done right by the original builder. He rebuilt it properly with step flashing instead of just running a bead of caulk over it like the last two people did."
— Daniela Delgado