Tile roofing
Architectural shingles
Metal roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Replacement Across Highland
A full roof replacement in Highland typically runs between $9,800 and $18,500 for an average single-story ranch home, with material choice and decking condition being the two biggest variables. Most jobs take three to five working days once materials are on site. If you’re calling from the 92346 ZIP code, you’re dealing with a specific set of conditions: Santa Ana wind gusts off the Cajon Pass, summer heat that breaks 100°F, and mid-century framing that often needs more than just new shingles.
Tilecraft Roofing has replaced roofs throughout Highland, from the older tracts near Baseline to the newer subdivisions east of the 210. We know what’s under the shingles here because we’ve opened up hundreds of these roofs. Call (833) 467-4846 for a free inspection and written estimate. We look before we quote.
Why Tilecraft Roofing Is Highland’s Preferred Roof Replacement Company
Homeowners in Highland call us because we don’t show up with one brand and a sales pitch. We carry and install products from seven major manufacturers: GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. That means you get a recommendation based on your roof’s pitch, exposure, and ventilation, not whatever is sitting in our warehouse.
Ruben Castellano runs our crews with a simple rule: inspect first, quote second. Highland customers have told us they appreciate that we’ll tell them when a repair is the smarter move. Repair when repair is right, replace when it’s not. That honesty is why a lot of our Highland work comes from referrals. A neighbor on one street sees our crew on another and asks who’s doing the roof. We show up, we document, we communicate.
You’ll also deal with the same crew from the first inspection through the final walk-through. We don’t subcontract the work out. The people who measure your roof are the people who tear it off and the people who nail down the new one. For a city like Highland, where roof replacements often turn up hidden framing and sheathing problems, that continuity matters.
Styles & brands we work with






Asphalt Shingle Roof Replacement in Highland
Asphalt Shingle Roof Replacement in Highland is the work we do most often, and for good reason: the majority of homes here were built between the 1950s and 1970s, and many are on their second or third shingle layer. Heat, UV, and wind-lofted debris from the pass chew through shingles fast. A typical asphalt roof in Highland lasts 15 to 22 years, not the 25 to 30 you’ll see quoted for coastal communities.
Removing Old Layers
California building code allows up to two layers of shingles in most cases, but we rarely recommend roofing over an existing layer in Highland. The extra weight stresses old framing, and a tear-off lets us inspect the decking and flashing underneath. Most Highland re-roofs include full tear-off. Expect that line item on your quote.
Underlayment and Ventilation
We install a high-grade synthetic underlayment on every Highland job. The original felt paper on these older homes is usually baked, cracked, or missing entirely. We also check the attic ventilation. Many 1960s tract homes in Highland were built with minimal ridge or eave venting, and that trapped heat is exactly what destroys shingles from the underside. We’ll quote a ridge vent upgrade when the roof needs it.
New Roof Installation in Highland
New Roof Installation in Highland covers two situations: new construction, and a full tear-off where the underlying structure is rebuilt or significantly repaired. For new construction, we work with builders from framing to final inspection. For existing homes, this scope comes into play when the existing roof is too far gone to patch, or when a homeowner is converting from wood shake to a modern system and wants the decking, underlayment, and ventilation addressed as one project.
Decking Replacement
Highland’s mid-century homes often have 1×6 skip sheathing rather than a solid plywood or OSB deck. Skip sheathing was fine for wood shake in 1965. It doesn’t meet code for asphalt shingle installation. When we open up these roofs, we replace skip sheathing with solid plywood or OSB to current code. That’s a real cost, but skipping it means your new shingles fail at the seams. We write allowances into the contract so you know the number before we start, not after.
Tile and Specialty Systems
Because we’re authorized to install Boral products, we handle clay and concrete tile systems that most Highland roofers won’t touch. Tile is heavier and requires a structural check before installation. If your home was originally engineered for lighter materials, we’ll tell you what reinforcement is needed before we quote the tile system. Seven leading brands, one crew.
Trusted Brands We Service in Highland
We install Atlas and Tamko asphalt shingle lines for Highland homeowners who want strong wind and UV performance without paying for brand-name markup on the top tier. For longer-life architectural shingles, GAF Timberline is our most-requested product here; the wider exposure and stronger sealant strips hold up to Santa Ana gusts better than three-tab. When a homeowner wants clay-tile aesthetics on a mid-century ranch, we quote Boral. We keep a steady inventory of high-wind fasteners and synthetic underlayment stocked for Highland jobs, so material delays don’t stretch your roof replacement into a third week.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Replacement Problems We See in Highland Homes
- Wind-lofted debris damage. After a Santa Ana event, palm fronds and eucalyptus branches land in valleys and sit there. Debris traps moisture, breaks tiles, and lifts shingles at the edges. We clean valleys on every Highland tear-off, and we replace the valley metal rather than reuse it.
- Brittle, heat-damaged sheathing. The intense inland sun bakes plywood and skip sheathing until it crumbles at the edges. Nails lose bite. On a 1960s ranch off of Boulder Avenue, our crew removed three layers of failed asphalt shingles and found the original 1×6 skip sheathing had been baked brittle with visible heat damage near the ridge and valleys clogged with palm frond debris from the last Santa Ana event. We replaced the damaged decking, installed a new ice and water shield in the valleys, and upgraded to a ridge vent system, documenting each step and getting written approval for the additional decking replacement before proceeding.
- Failed flashing sealant. UV degrades sealant at the chimney, vents, and pipe collars within a single summer. Once the sealant fails, water follows the nails. We replace all flashings on a Highland re-roof rather than caulking over old metal.
- Ventilation that never worked. Many mid-century Highland homes were built with gable vents only, no ridge vent, and no soffit intake. Heat builds in the attic, cooks the shingles from below, and shortens the roof’s life by years. Adding modern ventilation is part of most Highland replacements we do.
Pricing for Roof Replacement in Highland, CA
A full asphalt shingle replacement on a typical 1,600 to 2,000 square foot Highland ranch home runs $9,800 to $14,500, including tear-off, synthetic underlayment, new flashings, and haul-away. Larger homes or steeper pitches push that to $16,000 to $18,500. Architectural shingles add $1,500 to $3,000 over three-tab. Decking replacement, when needed, runs $2.75 to $4.00 per square foot of replaced deck area, and we write that allowance into the contract before we start. Tile systems from Boral start around $22,000 for a medium-sized home and go up from there. Every quote is a line-item written estimate, and we don’t change the price mid-job without your written sign-off. Call (833) 467-4846 to schedule a free inspection and get real numbers for your roof.
We Also Serve Cities Near Highland
Tilecraft Roofing works throughout the Inland Empire. We handle Roof Replacement in San Bernardino, Muscoy, Redlands, and Loma Linda, applying the same inspection-first process and seven-brand material selection. If you’re in Highland or a neighboring city, the crew and the standards are identical. Call (833) 467-4846 with your address and we’ll tell you what we’re seeing in your specific neighborhood.
Serving Highland, CA — Our Local Coverage Area
We’re based in the Highland area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Replacement in Highland
We write a decking replacement allowance into every Highland contract, typically covering 10% to 15% of the roof’s square footage. If we open the roof and find more damage, we stop, photograph it, show you the condition, and get written approval before replacing a single additional sheet. You never pay for surprise work you didn’t approve. Call (833) 467-4846 and we’ll walk you through how the allowance works on your specific roof.
For most Highland homes, we recommend GAF Timberline architectural shingles with a high-wind fastening pattern, because the sealant strips and heavier mat resist Santa Ana gusts better than standard three-tab. For homeowners who want a premium look, Atlas and Tamko both make strong architectural lines. For tile, Boral is the standard. The right material for your roof depends on your pitch, exposure, and framing, which is why we inspect before we quote.
Yes, a permit is required in Highland for a roof replacement. When we pull the permit and the inspector reviews the project, common triggers on mid-century homes are solid decking requirements for the shingle system, ventilation upgrades, and occasionally strapping or reinforcement if the framing doesn’t meet current code. We’ll tell you what’s likely before we start, and we pull the permit ourselves. Call (833) 467-4846 for a scope-of-work breakdown for your home’s era.
We use a six-nail fastening pattern on every shingle in Highland, not the standard four, and we hand-seal the leading edge shingles at the eaves and rakes when the manufacturer allows it. We also inspect and replace the drip edge and use high-wind underlayment rated for the uplift zone at the base of the San Bernardino Mountains. Wind-rated shingle lines get a manufacturer’s wind warranty that standard products don’t carry.
A square is 100 square feet of roof area. A 2,000 square foot home might have 2,300 to 2,600 square feet of roof surface, so 23 to 26 squares. When comparing quotes, ask how many squares the contractor measured, what the price per square includes, and whether tear-off and permits are in the number. A low price per square that doesn’t include decking or underlayment is not a lower price. Call (833) 467-4846 and we’ll send you a measured line-item estimate with everything included.
Written by Ruben Castellano, Owner at Tilecraft Roofing, serving Highland and the Inland Empire.